Свържете се с нас
- Четвъртият етаж, зона - A3, авиационна бизнес зона, Dongli Distrct, Tianjin, Китай.
- >salesmanager@coilwinding
machinechina.com - +8613072088960
4-станция Напълно автоматична 4-станционна машина за вътрешно навиване
3. Technical requirements for stator winding1.1. Workpiece descriptionA total of 1 product workpiece stator, respectively: outer diameter inner diameter stack height (not including the frame)1.120mm86mm28mm (The outer diameter is the same, but the stack height can be adjusted.)3.1.1 For winding requirements, please refer to Party A's drawings. The dimensions are designed with reference to the samples provided by Party A. (Party B is only responsible for the sample size. If it is involved in a situation that is inconsistent with the sample size, Party B will not bear the corresponding responsibility, but the height can be adjusted. ).3.1.2 The test after the equipment is wound meets the salt water pinhole test requirements of Party A (3 meters not more than 1 point), and the qualified rate of finished products is 100 percent within the allowable range of the parameters.
Описание
NAME:GW-IN200-4 Full automatic 4 station internal winding machine
СПЕЦИФИКАЦИЯ
Номер на навиване | 4 | Преброяване на точник | 0.5 оборота |
Модел | GW-IN200-4 | Линия аккуар | 0.01 мм |
максимална скорост | 600 об./мин | Контролен номер | 5-осово серво управление на Yaskawa |
Оптимален диаметър на намотката | 0.05 мм-1,2 мм | Мощност на машината | 11KW |
Точност на линията | 0.01 мм | Работно налягане | 0.4-0.7Mpa |
Номер на слота на статора | 2,3,4,6,8,9,12....... | Входяща мощност | AC380V 50/60HZ |
Приложим вътрешен диаметър на статора | По-голям или равен на 10 мм | Тегло на машината | 1000 кг |
Приложим външен диаметър на статора | По-малко или равно на 120 мм | Габаритни размери | 150012001950 мм |
Приложете височина на стека от желязна сърцевина | По-малко или равно на 100 мм |
Features :
1. The wire can be wound on any track by moving the wire mouth up and down and rotating the iron core. Therefore, by changing the computer winding program to correspond to different core stack thickness and different core pole number of winding. 2. Any abnormal operation, failure state to man-machine dialogue mode prompt operation, maintenance.
3. The number of winding loops can be set arbitrarily in the way of thread, and the specified 360 degrees can be stopped at any position, so that the wire passing is simple and convenient and the overall production efficiency is shortened.
4. When winding, the number of coils can be changed flexibly in each layer to realize different types of products.
5. Product programming is simple and convenient, with a unique special software, unlimited upload download storage. Easy to master with simple training.
6. Due to the high-performance control system and Servo Motor, it can ensure the stability of the position of the wire and shorten the time. Kill.
7.According to customer requirements can choose manual or automatic manipulator loading and unloading mode.
8. Всяка единица е стандартизирана, лесна за смяна и разглобяване.
Популярни тагове: 4-станция напълно автоматична 4-станционна машина за вътрешно навиване, Китай, доставчици, производители, фабрика, цена, произведени в Китай
Accessories Model
НЕ. | ИМЕ | МОДЕЛ | СПЕЦИФИКАЦИЯ | МАРКА |
1 | 400W Servo motor(2PCS) | 安川 | ||
2 | 3000W Servo motor(2PCS) | 安川 | ||
3 | 4000W Servo motor(1PCS) | 安川 | ||
4 | 400W Servo controller(2PCS) | 安川 | ||
5 | 3000W Servo controller(1PCS) | 安川 | ||
6 | 4000W Servo controller(2PCS) | 安川 | ||
7 | IO module(32IN 32OUT) | 安川 | ||
8 | M-3 Communication cable | 安川 | ||
9 | CPU module | 安川 | ||
10 | Base unit MBU304 (Single slot) | 安川 | ||
11 | Терминална станция | 安川 | ||
12 | IO Cable | 安川 | ||
13 | Комуникационен серво CN1 щепсел | 安川 | ||
14 | Краен резистор | 安川 | ||
15 | Тъч скрийн | 10 inch | 威纶 | |
16 | Междинно реле | 施耐德 | ||
17 | Релейна база | 施耐德 | ||
18 | 24V импулсно захранване | 施耐德 | ||
19 | Променлив контактор | 施耐德 | ||
20 | C16 Прекъсвачът | 施耐德 | ||
21 | C60 Прекъсвачът | 施耐德 | ||
22 | Бутони | 施耐德 | ||
23 | Елемент за обработка на източник на въздух | 亚德客 | ||
24 | Превключвател за налягане с електронен цифров дисплей | 亚德客 | ||
25 | Индукционен превключвател | 亚德客 | ||
26 | Цилиндър за ножици | Диаметър 32, ход 10 | 亚德客 | |
27 | Повдигащ се цилиндър с ножици | Диаметър 25, ход 20 | 亚德客 | |
28 | Цилиндър за трансфер на игла | Диаметър 16, ход 100 | 亚德客 | |
29 | Формен цилиндър | Диаметър 40, ход 15 | 亚德客 | |
30 | Електромагнитният клапан | 3 links ,2 positions | 亚德客 | |
31 | съединител | 2 свързваща част | 亚德客 | |
32 | Обтегач | 亚博 | ||
33 | DC24V | 台邦 | ||
34 | Сензор за произход | 欧姆龙 | ||
35 | Краен превключвател | 欧姆龙 | ||
36 | Превключвател на втора скорост | 施耐德 | ||
37 | Зелен нормално отворен бутон | 施耐德 | ||
38 | Червен нормално затворен бутон | 施耐德 | ||
39 | Предпазна решетка | DC24V | 德国劳恩 | |
40 | винт | 台湾上银 | ||
41 | Ръководство | 台湾上银 | ||
42 | трансформатор | 12KW | 中科 |
Може да харесаш също
















